Audionet EPX User Manual download pdf (Page 6)

4 Installation and connection

Important

• For connecting the EPX to or removing from the mother unit, the

EPX and the mother unit must be switched off to prevent damage

from both devices.

• Please make sure that all cables are in absolute best conditions!

Broken shields or shorted cables could damage both devices.

4.1 Placement

Important

• Place the EPX right beside or at least 20 cm above/below of the

mother unit.

• It is recommended to place the EPX into a high quality rack or onto a

stable table.

• Do not expose the unit to direct sunlight.

• Do not cover the ventilation slots.

• Do not place the EPX in close range to heat sources like radiators. Do

not place the EPX on top of other units, especially not on top of

power amplifiers, pre amplifiers or similar that produce heat. Both

units could suffer damage from thermal overload.

• Do not use the unit in places where it is exposed to vibrations.

• Do not place the unit close to loudspeakers or into the corner of a

room where it is exposed to high levels of sonic energy, which might

reduce the sound quality of the unit.

4.2 Mains connection

The mains input 2 *

is on the back panel of the EPX. To connect the unit

to the mains use the included mains cord respectively the mains

cord of your mother unit (see section 'Connecting the mother unit'

on page 7).

If you prefer to use a different power cord make sure that it meets the

specifications for your home country.

see numbers in section 'Overview back panel' on page 5.

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Audionet EPX User Manual Page 6