Audionet ART G3 User Manual download pdf (Page 49)

10.3 Set Display Brightness

To adjust the brightness of the display of the ART G3 press key stop / set

long 3 times. Use keys back / pause and skip / play to adjust the bright-

ness.

Important

· Long-term usage of the display set to maximum brightness (set-

ting 100%) may cause extended signs of wear resulting in a decay

of contrast or brightness of individual dots in the display. Do not

use the display with a brightness set higher than the factory de-

fault setting of 50% over a longer period of time.

Note

· Is the brightness set to Off the display is only on during setup ad-

justments and will switch off several seconds after the last entry. The

same applies for direct track access, time search and skip-

ping/searching.

· If the disc is stopped, the cover opened or no disc inserted while the

cover is closed, the ART G3 automatically activates the display saver

after 10 minutes without user entry.

· During active display saver, all messages will be displayed at 25%

brightness and varying locations in the display changing every 12

seconds to prevent any 'burn-in' effects of the display.

· During active display saver, the total playing time is displayed in the

form 16Tracks 74min 03sec while the disc is stopped.

Tip

· On the Audionet Metal Remote Control RC 1 use setup key ä to get

to menu item Set Display Brightness. Use keys 9 and : to

adjust the brightness of the display.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54

No comments

Audionet ART G3 User Manual Page 49